Jeti Mezon ESC Controller mit Telemetrie

  • Feffe
  • Feffe's Avatar Offline
  • Neues Mitglied
  • Neues Mitglied
  • Beiträge: 14
  • Dank erhalten: 1

Feffe antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 19 Nov. 2012 11:36 #13
I will check the FW version of the Mezon this evening to see if it is 1.22.

I do believe everything is correctly installed, the cable from the ESC with red connector goes to port EXT on the Rsat2 (I don´t have any other sensors or ExpanderEX connected). And the fact that I can see data from and configure the Mezon wirelessly through the jetibox emulator mode on both the DC16 and JBP indicate that the installation is good, right?

The black cable from the Rsat2 is connected to a mini V-bar gyro and these are working correctly together too (set up with 8-channel computed mode at 20ms).

Anyway, I´ll check if 1.22 and confirm back.
von Feffe

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • PW
  • PW's Avatar Offline
  • Moderator
  • Moderator
  • Beiträge: 9742
  • Dank erhalten: 3832

PW antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 19 Nov. 2012 16:16 #14
Hi,

I saw that you are also at rcgroups.com and in contact with ESPRIT Jeti/USA. Let us know if you found the reason.


Regards

PW
Rechtsbeistand u.a. bei "Modellflugproblemen"etc. : Rechtsanwälte Wessels & Partner, Tel.: 02362/27065

PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
von PW

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Feffe
  • Feffe's Avatar Offline
  • Neues Mitglied
  • Neues Mitglied
  • Beiträge: 14
  • Dank erhalten: 1

Feffe antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 19 Nov. 2012 19:53 #15
Small update, the Mezon had FW 1.22 so that gave no hope of an easy resolution.

The controller has ID 39201:21916 if that can give the developer some idea. I also tried to connect an ExpanderEX between the Rsat2 and the Mezon to see if it made any difference. The Expander showed up in the Jetibox as expected and the Mezon also came up under one of the four ports, but still no EX telemetry (it was a longshot anyway).

Here is a thread with a few pics of my installation: www.helisweden.se/showthread.php?t=4146 , but there is another guy with exactly the same issue on RCgroups so I doubt that is related to installation.

I am now out of ideas :(
von Feffe

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Feffe
  • Feffe's Avatar Offline
  • Neues Mitglied
  • Neues Mitglied
  • Beiträge: 14
  • Dank erhalten: 1

Feffe antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 20 Nov. 2012 13:55 #16
I forgot that a login is needed to see photos on helisweden, here are attached a few pics instead:






von Feffe

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Oliver
  • Oliver's Avatar Offline
  • Platinum Mitglied
  • Platinum Mitglied
  • Beiträge: 439
  • Dank erhalten: 21

Oliver antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 27 Nov. 2012 15:52 #17
Dann ist nur noch zu hoffen, dass er auch ohne Governor Modus am VSTABI funktioniert. .....

Die Werte und was er können soll, sind ja vielversprechend....

....und meine Jives warten auf Ablöse, da ich endlich mit der Vstabidrehzahlregelung fliegen möchte....

OLI
von Oliver

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • uwe neesen
  • uwe neesen's Avatar Offline
  • Moderator
  • Moderator
  • Beiträge: 1970
  • Dank erhalten: 2347

uwe neesen antwortete auf Jeti Mezon ESC Controller mit Telemetrie

Posted 27 Nov. 2012 16:02 #18
Mezon und V-Stabi Governormode (mit zusätzl. Sensor fürs V-Stabi!) funktioniert astrein. Das haben wir schon seit einiger Zeit im Test und sind sehr zufrieden. Dafür gibt es einen speziellen "fast response" Mode im Mezon regler.
viele Grüße, Uwe
BITTE keine PN, Anfragen immer per Mail an info@hacker-motor.com So lassen sich Links und Anhänge, Tipps und Tricks besser und einfacher weitergeben.
Hacker Factory-team
von uwe neesen
Folgende Benutzer bedankten sich: PW

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Ladezeit der Seite: 1.213 Sekunden