2.9.2025
JETI DC-24 II, Version 6.03.1832

Logfile: 14-00-12.log

A current rise at end of log is not shown properly.
During navigation and zooming to the end of log, cursor position not as expected and finaly wave stops working at all.

Try to find and display the current rise at the end of log at time 2989/2990.

The same log is shown in Jeti Studio properly.
Studio-OK-1.png
Studio-OK-2.png

Screen002.png
1. Select Log 14-00-12.log
2. Activate UniS-E: Spannung, UniS-E: Strom, UniS-E: Höhe
3. start display

Screen004.png
4. Zoom out to maximum (time 0-600)

Screen005.png
5. navigate to the right to end of log at 3000
zero current is shown, only one alarm is shown

Screen007.png
6. move cursor to end
7. zoom in
8. move cursor to end again
9. zoom in, move cursor, until current rise at ~2992 is visible

Screen008.png
10. zoom in further
11. cursor at ~2972
nothing special at end of log is displayed, no current rise is shown

Screen009.png
12. zoom in, current rise is displayed at ~2992
no alarm events are shown

Screen10.png
Screen11.png
13. zoom in to maximum zoom, time 2997-2992
looks good

Screen12.png
14. pan right
15. zoom out, zoom out, zoom out, zoom out
no time shown any more
16. try pan left several times
wave viewer hangs at position as shown in Screen12.png
17. only ESC end viewer and recovers