Problem with 3 times repeated alarms
- w.w.
- Offline Autor
- Platinum Mitglied
- Beiträge: 1049
- Dank erhalten: 364
When any alarm is set to repeat 3x any other alarm, which is set to repeat is only given once even the value continously stays above / below the trigger level. This should be fixed.
Example: First alarm for revoultions bigger than 3.750 rpm with 3x repetitions (lift off head speed). Second alarm on lowest cell voltage set to less than 3,4V with repetition. Now when the lowest cell has less than 3,4V only once the alarm is thrown, even when the lowest cell falls further and stays below 3,4V. This can be missinterpreted as a short voltage fall due to a power consumpting maneuver with a voltage above 3,4V shortly afterwards.
In such a case the alarm sould be repeated until the lowest cell voltage raises to above 3.4V.
best regards
Wolfgang
Example: First alarm for revoultions bigger than 3.750 rpm with 3x repetitions (lift off head speed). Second alarm on lowest cell voltage set to less than 3,4V with repetition. Now when the lowest cell has less than 3,4V only once the alarm is thrown, even when the lowest cell falls further and stays below 3,4V. This can be missinterpreted as a short voltage fall due to a power consumpting maneuver with a voltage above 3,4V shortly afterwards.
In such a case the alarm sould be repeated until the lowest cell voltage raises to above 3.4V.
best regards
Wolfgang
Gruß Wolfgang
von w.w.
Folgende Benutzer bedankten sich: Sascha Haber, Küstenschwalbe
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Küstenschwalbe
- Offline
- Platinum Mitglied
- Beiträge: 355
- Dank erhalten: 160
Yes it's a bug.
When you activate a "3x alarm" automatically all the important "alltime" alarms are relegated into "only once" alarms. :S
a case of beer for Wolfgang
When you activate a "3x alarm" automatically all the important "alltime" alarms are relegated into "only once" alarms. :S
a case of beer for Wolfgang
Last Edit:12 Juli 2015 13:34
von Küstenschwalbe
Letzte Änderung: 12 Juli 2015 13:34 von Küstenschwalbe.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Raf
- Offline
- Premium Mitglied
- Beiträge: 140
- Dank erhalten: 189
Ok, this will be solved in the update.
Voltario T30, Touch Switch, MicroVario, AMS, SE6
von Raf
Folgende Benutzer bedankten sich: PW, w.w., ***EX, HFS
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- PW
- Offline
- Moderator
- Beiträge: 9680
- Dank erhalten: 3806
Hi Martin,
thank´s for info
Regards
PW
thank´s for info
Regards
PW
Rechtsbeistand u.a. bei "Modellflugproblemen"etc. : Rechtsanwälte Wessels & Partner, Tel.: 02362/27065
PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
von PW
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Ladezeit der Seite: 0.974 Sekunden