DS16 Screen fogging
- PaulJetA1
- Offline Autor
- Neues Mitglied
- Beiträge: 2
- Dank erhalten: 0
I apologise if this has been asked before, DS 16 serious fogging of the screen when in sunlight. So bad none of the screen could be seen the only was to cure it was to put the TX back in the shade. Has there been a remedy for this situation. Thanks for any info Paul
von PaulJetA1
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- w.w.
- Offline
- Platinum Mitglied
- Beiträge: 1049
- Dank erhalten: 364
Hello,
this is a Problem, some of us have experienced. Here i sa Long thread about it. The display of my DS-16 shows the same especially when first using it in hot conditions. After some time it gets better.
this is a Problem, some of us have experienced. Here i sa Long thread about it. The display of my DS-16 shows the same especially when first using it in hot conditions. After some time it gets better.
Gruß Wolfgang
von w.w.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- bangkokpete
- Offline
- Senior Mitglied
- Beiträge: 58
- Dank erhalten: 6
PaulJetA1 wrote: I apologise if this has been asked before, DS 16 serious fogging of the screen when in sunlight. So bad none of the screen could be seen the only was to cure it was to put the TX back in the shade. Has there been a remedy for this situation. Thanks for any info Paul
Hi,
Probleme is reproducible.
Are you storing your transmitter in a relative humid room (cellar or hobbyroom) ?
Have the same, if I store my DS14
transmitter with my friend (in his "bastelkeller"). Effect does not show, if I store in my flat.
Peter
Gesendet von iPad mit Tapatalk
von bangkokpete
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- PW
- Offline
- Moderator
- Beiträge: 9680
- Dank erhalten: 3806
Hi,
correct: it is "condension", normal reaction (high humidity, big temperatur differences etc.)
I let the TX case in my hobby room open for example.
Regards
PW
correct: it is "condension", normal reaction (high humidity, big temperatur differences etc.)
I let the TX case in my hobby room open for example.
Regards
PW
Rechtsbeistand u.a. bei "Modellflugproblemen"etc. : Rechtsanwälte Wessels & Partner, Tel.: 02362/27065
PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
PW Modellbautechnik ( Jeti Kombiangebote, Beratung/Einstellservice etc.)
von PW
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- sunbeam
- Offline
- Platinum Mitglied
- Beiträge: 2671
- Dank erhalten: 830
Hello,
the display-fogging has got nothing to do with the way how to store the TX.
...but that does not mean that one should store the TX in humid conditions
Greetings,
Kai
the display-fogging has got nothing to do with the way how to store the TX.
...but that does not mean that one should store the TX in humid conditions
Greetings,
Kai
Last Edit:13 Juni 2017 08:11
von sunbeam
Letzte Änderung: 13 Juni 2017 08:11 von sunbeam.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- PaulJetA1
- Offline Autor
- Neues Mitglied
- Beiträge: 2
- Dank erhalten: 0
Thank you all for your advice, It would appear the Jeti TXs are more susceptible to fogging dependant upon how you store them and atmospheric conditions, more so than other makes. I will in future be more weary of this and try to alleviate the issues with storage and TX temp.
Paul
Paul
von PaulJetA1
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Ladezeit der Seite: 1.063 Sekunden